English | 中文 Home About Us Products Application Technology Quality Control Search FAQ Contact Us
►  Miniature Ball Bearing
▪ Deep Groove Ball Bearing
▪ Flange Bearings
▪ Metric Series Bearing
▪ Inch Series Bearing
▪ Stainless Steel Ball Bearing
▪ Angular Contact Ball Bearing
▪ Ceramic Ball Bearing
▪ KP-A Series Control Ball Bearing
▪ DW Series Bearing
▪ Non-Standard Bearing
►  Bearing Parts
▪ Bearing Outer Ring
▪ Bearing Inner Ring
▪ Balls
▪ Bearing Cage or Retainer
▪ Shields or Seal
▪ Lubrication
  Home / Products / Miniature Ball Bearing / Flange Bearings  

Flange bearings are cost effective by not requiring spot facing when housing the end face. Many small balls are used in our extra thin type bearings, making friction torque and torque fluctuation low. They are very resilient and rotate smoothly.

They are available open, shielded or sealed and Teflon Sealed, Rubber Seals. Tolerance can be made: ABEC-1, ABEC-3, ABEC-5, ABEC-7 to ABEC-9 with bore sizes as small as 1mm. The smaller sizes are sometimes referred to as instrument bearings. Available in SAE52100 chrome steel and AISI440C or KS440 (ACD34/X65Cr13) stainless steel, these metric sized deep groove radial flanged miniature bearings can withstand heavy radial loads and moderate thrust loads in both directions. Flanged miniature bearings have an outer ring flange to facilitate location in a housing.

Many of these flanged miniature bearings can be supplied to order with ceramic balls (hybrid bearings). Most sizes are available in stainless steel or passivated stainless steel for more corrosive environments.


Product Tables
Inch Series
flanged Bore sizes 0.0937 to 0.5000 inches

Metric Series
Flanged Bore sizes 1.0000 mm to 10.0000 mm

Metric Series Bearing

Inch Series Bearing
Home About Us Products Application Technology Quality Control Search FAQ Contact Us

Copyright 2010 XW, Inc. All rights reserved.

Designed by: Abledesigner.com, Hosted by 2globalmart.com